    Click to enlarge | DIM10HPESlave Low Voltage LED Dimmer Module and Power Booster for DIMxx Series Dimmers. Waterproof, Extended Temp, 12V 24V, 16A output (192W at 12V, 384W at 24V).Features:
< Back to Lamp & LED Dimmers |
| Overview | Specification | Connection Diagram | Related Products |
The ABELtronics DIM10HPE is a high power, high frequency solid state relay that is designed to boost the power rating of the ABELtronics DIMxx series Dimmer Modules. Operating from 12V or 24V, the DIM10HPE has a slave control input that is designed to connect to the output of the other dimmer modules in the series. The DIM10HPE switches its output on when the Control Input wire exceeds 5V, and off when the control input goes below 2V. The output can be any resistive load up to 16A. Up to one hundred DIM10HPEs can be connected to the master module, and the DIM10HPE outputs can be paralleled, providing a total dimming capacity of up to 1600 amperes.
The units are hermetically sealed and IP68 rated with wire terminations. They are potted in an ABS enclosure with epoxy resin, and are fully protected against water and oils.
The module is manufactured in the extended temperature range of -40 - 70°C (-40 - 160°F).
The DIM10HPE is a slave dimmer, and must be connected to either a DIM11, DIM12, DIM13, DIM14 or DIM15 to provide it with a PWM signal. Each DIM10HPE module must have its +Supply terminal fused separately at 16A or less. The controlling module (either the DIM11, 12, 13, 14 or 15) can have its +Supply fused at 1A.
The DIM10HPE can also be used as a solid state relay. The output will be on for as long as the control input is above about 5V (referenced to the DIM10HPE's Earth wire). The output will turn off when the control input falls below about 2V. Although the module is designed to work at the 240Hz frequency of the other DIMxx series modules, the input frequency can be up to 2kHz; finding applications where a mechanical relay is far too slow.
DIM10HPE Specifications
| Parameter | DIM10HPE | Comment |
|---|---|---|
| Datasheet |  | |
| Nominal Supply Voltage Range | 9 - 32 V DC | |
| Peak Supply Voltage Range | 5.5 - 40 V DC | Operation not guaranteed |
| Output Type | High-Side Positive | |
| PWM Switching Frequency | 240Hz, 0% - 100% Duty Cycle | +/- 3% |
| Maximum Output Current | 16A | |
| Non-Sustained Peak Output Current | 60A | < 3sec |
| Maximum Load | 192W (12V), 384W (24V) | |
| Control Input Type | Slave PWM | |
| Quiescent Current, max | 0.01mA | No-load operating current at maximum operating voltage |
| Operating Temperature Range | -40 - 70°C (-40 - 160°F) | |
| Dimensions | 52 × 52 × 31mm | L × W × H excl. fixings |
| Ingress Protection (IP Rating) | IP68 | |
| Mechanical Fixing | 2× 5.2mm dia, 20mm pitch | |
| Electrical Connection | Wire-ended, 4x 30cm | |
| Enclosure Style | Epoxy Potted ABS |
DIM10HPE Typical Connection Diagram
Related Products
| Image | Code and Description | Price Each | Buy | |
|---|---|---|---|---|
 | DIM10 - Power Boosting Slave Dimmer Slave Low Voltage LED Dimmer and Power Booster, 10A |   | £37.20 |  |
 | DIM11 - Single Switch One Touch Dimmer PWM 12V 24V Low Voltage LED Dimmer, Single Switch Controlled, 10A | | £38.40 | |
 | DIM11DIN - DIN-Mount Single Switch Dimmer PWM 12V 24V Low Voltage LED Dimmer, Single Switch Controlled, DIN-Rail, 5A | | £38.40 | |
 | DIM11HP - Single Switch One Touch Dimmer, High Power, IP68 PWM 12V 24V Low Voltage LED Dimmer, Single Switch Controlled, 16A | | £57.60 | |
 | DIM12 - Potentiometer Controlled Dimmer PWM 12V 24V Low Voltage LED Dimmer, Rotary Potentiometer Controlled, 10A | | £38.40 | |
 | DIM12-2W - Dual Output Potentiometer Dimmer, IP68 PWM 12V 24V Low Voltage Dual Output Potentiometer Controlled IP68 Waterproof LED Dimmer | | £57.60 | |
 | DIM12C - Inline Rotary Dimmer PWM LED Inline Rotary Dimmer, 12V 24V, 5A | | £55.20 |  from distributor |
 | DIM12DIN - DIN-Mount Potentiometer Controlled Dimmer PWM 12V 24V Low Voltage LED Dimmer, Rotary Potentiometer Controlled, DIN-Rail, 5A | | £38.40 | |
| DIM12HP - Potentiometer Controlled Dimmer, High Power, IP68 PWM 12V 24V Low Voltage LED Dimmer, Rotary Potentiometer Controlled, 16A, Waterproof | | £58.80 | |
 | DIM12N - Potentiometer Controlled Negative Output Dimmer PWM 12V 24V Low Voltage LED Dimmer, Rotary Potentiometer Controlled, 10A, Negative Output | | £43.06 | |
 | DIM13 - Dual Switch Dimmer PWM 12V 24V Low Voltage LED Dimmer, Dual Switch Controlled, 10A | | £38.40 | |
 | DIM13-2DIN - Dual Output Dual Switch Dimmer, DIN PWM 12V 24V Low Voltage Dual Output Switch Controlled DIN-mount LED Dimmer | | £50.40 | |
 | DIM13-2W - Dual Output Dual Switch Dimmer, IP68 PWM 12V 24V Low Voltage Dual Output Switch Controlled IP68 Waterproof LED Dimmer | | £50.40 | |
 | DIM13DIN - DIN-Mount Dual Switch Dimmer PWM 12V 24V Low Voltage LED Dimmer, Dual Switch Controlled, 5A | | £38.40 | |
 | DIM14 - 0-10 Voltage Controlled Dimmer PWM 12V 24V Low Voltage LED Dimmer, 0-10 Volt Controlled, 10A | | £48.00 | |
 | DIM14DIN - DIN-Mount 0-10 Voltage Controlled Dimmer PWM 12V 24V Low Voltage LED Dimmer, 0-10 Volt Controlled, 5A | | £48.00 | |
 | DIM14N - 0-10 Voltage Controlled Negative Output Dimmer PWM 12V 24V Low Voltage LED Dimmer, 0-10 Volt Controlled, 10A Negative Output | | £55.06 | |
 | DIM15 - Remote Radio Controlled Dimmer PWM 12V 24V Low Voltage Remote Radio Controlled IP68 Waterproof LED Dimmer, 10A | | £102.00 | |
 | DIM15-TRANS - Spare Transmitter for DIM15 DIM15 433MHz Keyfob Secure Radio Transmitter | | £19.20 | |
 | DIM16 - Light Intensity Controlled Dimmer PWM 12V 24V Low Voltage LED Dimmer, Light Intensity Lux Controlled, 10A | | £51.60 | |
 | DIM84DIN - 8 Channel Voltage Controlled Dimmer 8 Channel PWM 12V 24V Low Voltage LED Dimmer, 0-10 Volt Controlled | | £174.00 | |
 | ENCPOT10K - Enclosed Pot for DIM12 Series 10K Enclosed Pot for DIM12 LED Dimmer | | £2.88 | |
